Hyra Minigarngreier 600 Proff®
Rent Minigarngreier 600Proff with turntable mounted.
(Turntable sold separately)
Additional equipment for
Hyra Minigarngreierer 600Proff
360° turntable with welding plate
The turntable gives Hyra Minigarngreier 600Proff® a free rotation of 360°, with a grip that makes it easy to lock into any wanted position. The turntable makes the Hyra Net-clearers a more useful tool onboard. The turntable lays on a Teflon lining which gives a smooth rotation of the net-clearer.
The welding plate has good room for alternative suspension.
By ordering a turntable with the 600Proff, it's delivered pre-mounted.
360° Turntable with suspension for Hyra Rigg
If you are getting the Hyra Rigg® along with the Hyra minigarngreier 600Proff, we recommend this suspension. The turntable had the same properties as the Turntable with wielding plate, but this is a suspension designed for the Rigg. The turntable lays on a Teflon lining which gives a smooth rotation to the net-clearer.
The suspension has an internal Teflon lining, which makes it easier to move the net-clearer back and forth on the boom, and makes it easy to lock into the desired position.
By ordering the turntable along with the 600Proff, it will be delivered pre-mounted.
Hyra Minigargreier 600Proff®
HYRA MINIGARNGREIER 600Proff® is a greater and more powerful edition than the 400H. 600Proff is customized for fishermen on a professional scale, along the coastline, and is intended for boats above 7 meters.e
Like the 400H , the 600Proff is focused on weight, userfrendlyness, and quality. The weight is low, and constitutes a small destabilizing factor. 600Proff is easy to assemble, and disasamble, which makes it easy to switch to other fishing.
600Proff can be connected to the boat's hydraulics or with an electric hydraulic pump connected to a 12V or a 24V battery. HYRA a/s sells this as an accessory.
HYRA MINIGARNGREIER 600Proff® is a net-clearer and shall not be used for dragging the nets up from the water.
Inner width: 600mm
Outer width:710mm (with engine: 810mm)
maximum width inclusive net-catcher brackets: 940mm
The hydraulic control unit is mounted on the net-clearer Hoses between the engine and the hydraulic control unit are standard.
HYRA MINIGARNGREIER 600Proff® is built in aluminum and acid-proof steel.
Recommended liters of oil per minute: 12-18 liters max: 20 liters
For larger pumps, use a reduction valve.
Standard hydraulic coupling is 3/8"
Contact for offers.
360 ° turntable with welding plate with suspension for Hyra Rigg